If you are using the ProShow software to create a show here is some helpful
hints to make it easy to auto play the .exe:
-
1. After you have your show put together in Proshow,
Click on 'Create' in the menu and then click
'Create Executable' from the drop-down list
- 2. The box that appears has 3 tabs on top. Under the
'Menus' tab, select the far left option 'No Menus' on the
top scrolling options.
- 3. Under the 'Shows' tab, remove the check from the
'Include Intro Show'
|
-
4. Under the 'Output' tab, put a check in front of
the 'Start executable maximized' option
- 5. Remove the check from the 'Loop Show Forever' option
- 6. Set both the 'Window Size' and 'Maximum Resolution'
to 1024 x 768
- 7. Under 'Image Quality' I use 100% but some club members
have had to reduce this to 85% so you may need to experiment.
|
